KNF LABOPORT Manual De Instrucciones página 99

Chemically-resistant Laboratory pump N820.18 / N840.18
Translation of Original Operating Instruction, KNF 317428-317425 02/23
8.2 Perform commissioning
WARNING
WARNING
à
Only operate the pump in accordance with the operating
parameters and operating conditions described in Chapter
5 Technical data [} 24].
à
Ensure the proper use of the pump (See Chapter 3.6.1
Proper use [} 12]).
à
Eliminate the possibility of improper use of the pump (see
Chapter 3.6.2 Foreseeable misuse [} 12]).
à
Observe the safety instructions (see Chapter 3 Safety
[} 9]).
Risk of burns from hot pump parts and/
or hot medium
Some pump parts may be hot during or
after operation of the pump.
à
Allow the pump to cool after opera-
tion.
à
Take protective measures to pro-
tect against touching hot parts.
Injury to eyes
Coming too close to the inlet/outlet of
the pump may result in injury to the
eyes due to the present vacuum/oper-
ating pressure.
à
Do not look into the pump inlet/
outlet during operation.
Setup and connection
35
DE
EN
FR
ES
IT