Publicidad
English
tively, you can scan the QR code 1 (see label) to set up the connection.
5.3 Go to the website
• Open your web browser and enter the following web address:
http://192.168.1.1
Alternatively, you can scan the QR code 2 (see label) to open the software in the browser.
5.4 Start configuration
Select the desired language in the language selection and continue with the initial configuration.
Follow the instructions.
5.5 Meaning of status LED
• Status LED flashes white: Network is being searched or created.
• Status LED flashes blue: A new network has been created.
• Status LED flashes green: Device is connected to another EHEIM digital device.
6. Touch panel function
• RESET
Touch the touch field f with a finger for approx. 8 to 10 seconds until the status LED changes
color. If the status LED lights up green, the reset is complete and the device has been created the
network again. The network security key and QR code 1 are invalid. The network can be connec-
ted to without the network security key.
7. Disposal
When disposing of the appliance, heed the respective statutory regulations. Information on
the disposal of electrical and electronic appliances in the European Union: Within the Euro-
pean Union, disposal of electrically operated appliances is governed by national regulations
that are based on the EU Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE). The appliance may no longer be disposed of with the municipal or household waste.
The appliance will be accepted free of charge at municipal collection points or recycling cen-
tres. The product packaging is made up of recyclable materials. Dispose of them in an envi-
ronmentally responsible manner and take them for recycling.
8. Technical data
EHEIM LEDcontrol+e
Type no.
Input
Output
4200140
24V DC
Max. 180 watt
B 97 x H 97 x T 28 mm
Publicidad
