plastia urbalive TREE Manual De Instrucciones página 3

English
VERTICAL SELF-WATERING FLOWER POT
– THREE-PIECE SET + STAND
The product you are holding is made of recycled material. Slight colour instability
is a natural property of this material, and so the colours of the individual parts of
the product might differ slightly. You may also notice minor visual defects such as
coloured dots or shiny smudges, but these do not affect the function of the product.
The pack includes:
• 3× cone-shaped stopper - A
• 3× wick - B
• 3× planter (outer part)
• 3× fully removable container (insert)
• 2× metal brace - C
• 1× stand - D
Substrate volume: 3,4 l
Water volume: 1,1 l
(A) 3× (B) 3×
(C) 2×
(D) 1×
77,3 cm
31,3 cm
31,3 cm
Assembly, installation
1) Insert the cone-shaped stopper (A) in the drainage hole in the cover
(only when used inside).
TIP: Do not use the overflow stopper outdoors. The overflow outlet protects
the roots of the plants from excessive waterlogging in the event of heavy
rainfall or overwatering.
If you want to fix the whole set of pots to a wall, railings or shelf with an anchor
wire or string (not included), pull the wire or string through the groove in the
insert of the top flower pot.
2) Pull the wicks (B) in to the inserts.
3) Plant flowers into the inserts.
How to top up the substrate correctly:
We recommend that you fill the flower pot with substrate evenly up to a height
of 2 cm below the edge of the self-watering insert – this ensures that water will
not spill out of the pot during watering.
4) Place the first flower pot
on the stand (D).
5