Publicidad
Technical data
Power requirements
General power tool safety warnings
Safety warnings for angle grinders
Parts
Preparation
Start up
Maintenance
Authorized service centers
Warranty policy
Use and care recommendations
TO EXTEND THE LIFE OF YOUR TOOL, CLEAN IT WITH COMPRESSED AIR
AFTER EACH USE.
FULFILL THE WORKING CYCLES
50 min of work and 20 min of rest. Daily maximum 6 hours.
NEVER use or pull the power cord to carry, lift, or disconnect the tool.
NEVER press the lock button while the disc is running.
Perform periodic MAINTENANCE to your machine (page 10).
2
ENGLISH
Contents
3
3
To gain the best performance of
the tool, prolong the duty life,
4
make the Warranty valid if
necessary, and to avoid hazards
5
of fatal injuries please read and
understand this Manual before
7
8
Keep this manual for future references.
9
The illustrations in this manual are for reference
10
only. They might be different from the real tool.
11
12
CAUTION
using the tool.
Publicidad
