Publicidad
Idiomas disponibles
Idiomas disponibles
Sauna/Infrarot/Softclima/Infraclima
5.
Operation
Prerequisite/notice for the following operations:
d
The control panel is switched to standby. The time appears on the display.
.
The selected program starts automatically three seconds after pressing the last button.
.
*) The indicated cabin temperatures with Infrared - Infraclima relate to ambient temperatures of
20 °C - 25 °C.
Programs - temperature:
Sauna
Infrared *)
1 Individual
1 Individual
program
2 80 °C
2 34 °C
3 85 °C
3 37 °C
4 90 °C
4 40 °C
5.4.
Starting the sauna
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
To take a sauna, empty the evaporator water tank.
'
See Section 5.10., 5.12. - Shutting down the evaporator.
1.
Press the MODE button.
.
The last selected mode and settings appear on the display.
2.
If necessary press the MODE button again until SAUNA appears on the display.
.
After the heating phase the Bather symbol
use.
'
If you want to change the values for the selected program - see Section 6.
5.5.
Starting Infrared
1.
Press the MODE button.
.
The last selected mode and settings appear on the display.
2.
If necessary press the MODE button again until IR appears on the display.
.
After the heating phase the Bather symbol
use.
'
If you want to change the values for the selected program - see Section 6.
50701103/02.13
Programs - temperature/humidity:
Softclima
1 Individual
program
program
2 50 °C
3 55 °C
4 57 °C
5 60 °C
Infraclima *)
1 Individual
program
2 34 °C
3 36 °C
4 38 °C
5 40 °C
appears on the display. The cabin is ready for
appears on the display. The cabin is ready for
Humidity
Individual
program
PAGE 9
Publicidad
