Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Do not allow children to climb or play in or around this product.
• Use this unit for its intended purpose only. Do not use shelves as step ladder.
• To avoid damage, assemble the product on a sturdy, level and protective surface.
• Two or more persons must work together to install the unit onto the wall.
• Make sure all bolts/screws are tightly fastened before the unit is used.
• Check bolts/screws periodically and tighten them if necessary.
• Each shelf maximum load: 10 lbs.
WARNING
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED. USE
WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN IN-
STABILITY CAUSING POSSIBLE INJURY. DISTRIBUTE WEIGHT EVENLY.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Phillips Screwdriver, Level, Power Drill, 3/16 in. Drill Bit,
3/8 in. Drill Bit, 1/2 in. Socket Wrench, Stud Finder, Marking Pencil, Tape Measure, Step Ladder, and
Hammer.
Maximum load 10 lb. (4.5 kg)
Maximum load 5 lb. (2.2 kg)
5
ASSEMBLY INSTRUCTIONS
1.Insert cam bolts (BB) into drawer front panel (O),
using M4 x 12 mm screws (GG) to tighten the han-
dle (EE).
Hardware Used
BB
Cam Bolt
GG
M4 x 12 mm Screw
EE
Handle
2.Attach drawer back (N), drawer side left (L),drawer side
right (M), tighten with M4 x 32 mm screws (HH).
Hardware Used
HH
M4 x 32 mm Screw
3.Insert drawer bottom panel (P) into assembled drawer
back (N), drawer side left (L),drawer side right (M).
1
GG
x 4
x 2
x 1
EE
O
2
M
N
L
x 4
HH
3
M
N
L
P
6
BB
Publicidad
