Publicidad
Idiomas disponibles
Idiomas disponibles
USER GUIDE
OPERATION IN DETAIL
Check product and scope of delivery
Risk of damage!
If you open the packaging carelessly with a sharp knife or other pointed objects, the product can be
damaged quickly.
Be very careful when opening it.
1. Remove the product from the packaging.
2. Check if the delivery is complete.
3. Check whether the product or the individual parts show any damage. If this is the case, do not use
the product. Contact the hotline or e-mail address specified in this instruction manual.
Please note that the product has no mechanical buttons, but is controlled via touch-sen-
sitive keys on the housing. To control the functions described below, do not touch the
respective keys at the top of the labelling, but at the printed dot on the bevelled back
of the housing.
Connect power supply unit
NOTE:
RISK OF DAMAGE!
Operate the product only from grounded outlets rated 100 - 240 V AC, 50/60 Hz. If you are unsure of
the power supply at the installation site, check with the relevant power supplier.
1. Place the product on a dry, horizontal, and heat-insensitive surface.
2. Unwrap the power cord connected to the mains adapter (4) completely.
3. Insert the DC plug of the mains adapter (4) into the DC socket (12) on the back of the product.
4. Insert the mains plug into an easily accessible and properly installed socket outlet (protective con-
tact type F CEE 7/4 or Euro type C CEE 7/17).
The Hi-Fi speaker system (1) is now powered and ready for use.
Switching the product on/off
• To switch the product on, press the Standby button (6) on the top of the product.
• To switch the product off, press the Standby button (6) again.
Adjusting the volume
Touch the Volume + button (10) to increase the volume or the Volume - button (9) to decrease the
volume.
To mute the volume completely, touch the Volume - button (9) until no sound is heard. To unmute the
volume, touch the Volume + button (10) until the volume returns to an audible level.
Selecting playback mode
The product has a total of four different playback modes: Bluetooth
To select between the different playback modes, touch the Mode button (7) one or more times.
If no cable is connected to the product, the default mode after switching on is always Bluetooth
, AUX IN, Phono, and PC-USB.
®
16
mode.
®
Publicidad
