Publicidad
Idiomas disponibles
Idiomas disponibles
Status LED
The product has a status LED (3) on the front and LEDs in the two vacuum tube amplifiers (2). The
LEDs light up in different colours to indicate the respective playback mode:
LED colour code
Flashing red
Glowing red
Flashing green
Glowing green
Glowing purple
Glowing blue
Connection via Bluetooth
To output the sound of your external player (e.g., smartphone) via Bluetooth
first connect the devices to each other.
1. Switch on the Bluetooth
2. Switch on the product as described above. Then press the Mode button (7) once or several times
until you have selected the Bluetooth
3. Touch the Bluetooth
4. Let your external player/smartphone search for Bluetooth
on this in the instruction manual of your external player. After the search "BS-37" should also be
listed in the list of devices found.
5. Select "BS-37" from the list of devices found. You will hear a confirmation tone on the product. The
connection has been made and your product is now working as a Bluetooth
sounds that would otherwise be played by your player/smartphone will now be played by the prod-
uct.
6. To disconnect, touch the Bluetooth
If your external player is already connected to the product via Bluetooth
vices can automatically reconnect after switching on again.
Connection via NFC
For a faster wireless Bluetooth
product without manual setup, the product also features NFC (Near Field Communication) technology.
To connect via NFC, proceed as follows:
1. Switch on the Bluetooth
this in the instruction manual of your external player.
2. Switch on the product as described above. Then press the Mode button (7) once or several times
until you have selected the Bluetooth
3. Touch the Bluetooth
4. Hold your player/smartphone close (a few centimetres) to the NFC sensor (11) on the product.
5. The smartphone recognises the product, and a message appears on the smartphone display. Confirm
this.
6. The connection is complete, and your product is now working as a Bluetooth
®
function on your external player
®
playback mode.
®
button (8) on the product to enter Bluetooth
®
button (8) again. A confirmation tone sounds again.
®
connection between an external player (e.g., smartphone) and the
®
function and NFC on your external player. You will find more information on
®
playback mode.
®
button (8) on the product to enter Bluetooth
®
Mode
Stand-by mode
AUX mode
Bluetooth
pairing mode
®
Bluetooth
mode
®
Phono mode
PC-USB mode
devices. You will find more information
®
17
USER GUIDE
to the product, you must
®
pairing mode.
®
playback device. All
®
, the two de-
®
pairing mode.
®
playback device.
®
Publicidad
