Publicidad
Idiomas disponibles
Idiomas disponibles
USER GUIDE
AUX mode
You can also play the sound of an external player (e.g., smartphone, MP3 player) via the AUX input
(14) of the product. The connection is made via the 3.5 mm jack cable (5) included in the scope of
delivery or a similar cable. Proceed as follows:
1. Switch on the product as described above. Then press the Mode button (7) once or several times
until you have selected AUX mode.
2. Now insert one plug of the 3.5 mm jack cable (5) into a corresponding socket on your external
player. Insert the other plug of the 3.5 mm jack cable (5) into the AUX input (14) of the product.
3. Now control the audio playback via your external player. The sound is played back via the product.
4. To disconnect, remove the 3.5 mm jack cable (5) from the AUX input (14) of the product.
Phono mode
You can play back the sound of a record player with MM pick-up via the phono input (15) of the prod-
uct. The connection is made using the 3.5 mm jack cable (5) included in the scope of delivery or a
similar cable. To do this, proceed as follows:
1. Switch on the product as described above. Then press the Mode button (7) once or several times
until you have selected the Phono mode.
2. Now insert one plug of the 3.5 mm jack cable (5) into a corresponding socket on your record player.
Plug the other plug of the 3.5 mm jack cable (5) into the phono input (15) of the product.
3. Now control the audio playback via your record player. The sound is played back via the product.
4. To disconnect again, remove the 3.5 mm jack cable (5) from the phono input (15) of the product.
PC-USB mode
You can play the sound of a computer or laptop via the PC-USB socket (13) of the product. The con-
nection is made via a suitable USB cable (not included). To do this, proceed as follows:
1. Switch on the product as described above. Then press the Mode button (7) once or several times
until you have selected the PC-USB mode.
2. Now insert the plug of a USB cable into a corresponding socket on your computer or laptop. Insert
the USB 2.0 B plug of the USB cable into the PC-USB socket (13) of the product. No additional
software installation is necessary.
3. Now control the audio playback via your computer or laptop. The sound is played back via the prod-
uct.
4. To disconnect, remove the USB cable from the PC-USB socket (13) of the product.
TROUBLESHOOTING
The product cannot be switched on
Make sure that the product is correctly connected to the supplied mains adapter and that it is plugged
into a properly installed power outlet.
To switch on, touch the Standby button (6) at the printed dot on the bevelled back of the housing.
I cannot connect the product via Bluetooth
Make sure that the Bluetooth
10 m away from the product. Also make sure that the product is in Bluetooth
and lights in the vacuum tube amplifier flash green).
If the product is already connected to another device via Bluetooth
ther directly on your device or by pressing the Bluetooth® button (8) on the product and then switch
the product back to Bluetooth
to my smartphone
®
function on your smartphone is switched on and that it is not more than
®
pairing mode.
®
, first disconnect this connection, ei-
®
18
pairing mode (status LED
®
Publicidad
