List of monitor parts (fig. C)
1. Diode
The diode glows green when the device is running and red when
it is charging. When fully charged, the diode turns green again.
2. Menu button
In monitoring mode, press this button to enter the main menu.
In the main menu, press the button to go to the previous page.
3. Camera switch button
Press this button to switch the camera. The status bar shows which
camera is currently working.
4. Direction buttons
In the menu, buttons are used to move around the screen.
5. USB-C port
6. OK button
In the main menu, press this button to confirm the selected option
or action.
7. Brightness and volume settings button
8. Two-way audio communication button
9. Microphone
10. VOX mode button
11. Monitor on/off switch
Press and hold to turn the monitor on or off. Press briefly to
activate standby mode.
12. External antenna
Place the antenna up for the best signal.
13. Bracket
14. Speaker
15. MicroSD card port (max. 64 GB)
Monitor icons (fig. D)
1. Low battery level
2. No signal
EN
‑ 22 ‑