Publicidad
Idiomas disponibles
Idiomas disponibles
2. Select the "Cameras" option, then select the channel to which the
new camera is to be added (fig. 3a) and press the OK button. The
camera was paired with the monitor (fig. 3b).
3. If you have problems adding a camera, make sure the camera is
connected to a power source. If so, reset the camera by pressing
the reset button (5, fig. B), then add the camera manually (see:
Adding a Camera) and make sure the camera and monitor are
within 2 meters of each other.
Feeding time alarm settings
1. In the main menu, select the "Feeding" option (fig. 4).
2. Select the time after which the alarm should be triggered (A, fig.
4). Select whether the alarm is to be triggered once or in a loop
(B, fig. 4).
3. To turn off the feeding time alarm function, select OFF.
Sound detection
Select "Sound alarm" in the main menu, then choose the sound
detection sensitivity level: low, medium or high, or turn off the sound
alarm completely by selecting OFF (fig. 5).
• Low level: the device detects the baby's crying.
• Medium level: the device detects a loud voice.
• High level: the device detects normal speech.
If the receiver detects sound above the set volume level, the screen
will display the icon (
button to turn off the sound alarm.
Sound detection in energy-saving VOX mode
Before enabling VOX mode, sound detection must be enabled (see:
Sound detection).
To enable VOX mode, press the VOX button (10, fig. C), an icon will
appear in the upper left corner (
EN
) and beep for about 30 seconds. Press any
). The screen in sleep mode will
‑ 24 ‑
Publicidad
