Lionelo Babyline 6.2 Manual De Usuario página 27

Language selection
English is the device's default language.
In the main menu, select the "Language" option (fig. 16). Select one of
the available languages. The device will restart automatically.
Mounting
Drill two holes in the surface where you want to mount the device
(fig. 17), and then insert the wall plugs and screws into them (fig. 18).
Attach the camera to the screws, hooking them through the holes in
the bottom of the device (fig. 19).
Troubleshooting
Problem
Monitor does not display
camera image
Audio interference in two-
way audio communication
The monitor's battery
drains quickly
Possible solution
•
Make sure the camera is turned
on.
•
Reset the camera by pressing
the reset button (5, fig. B), and
then add the camera manually
(see: Adding a camera).
Unwanted sound may occur when
using the monitor at a distance
of less than 2 meters from the
camera. In this event:
•
Reduce the volume of the
monitor.
•
Increase the distance between
the monitor and the camera.
It is recommended to enable sleep
mode (see: Display settings).
‑ 27 ‑ EN