Descargar Imprimir esta página

Romer Britax MULTI-TECH II Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
MULTI-TECH II
Please note: Due to the size of the child seat, restrictions on the use of the front seats can
occur when using the MULTI/TECH 2 rearward/facing. BRITAX RÖMER recommends that your dealer
installs the seat before purchasing it.
MULTI-TECH II
The
1.
"Semi-universal"
with support leg
Weight class 9-25 kg
(rearward facing)
This means: The child safety seat is only
approved for installation with the support leg in
the vehicles included in the vehicle model/type
list below.
This list is constantly updated. The latest
version can be obtained from us or from our
website: www.britax.eu / www.roemer.eu
DO NOT use on a passenger seat
with a front airbag!
= airbag off!
Please observe the
instructions on the use of
child safety seats provided
in your owner's manual.
Never support the support leg of
the adapter against a storage
compartment in the vehicle floor.
 = OK with storage compartment!
You must only use the adapter on the
seats with storage compartment
which have been checked and
approved by us.
2.
"Universal"
with the vehicle's 3-point belt
and the 5-point belt of the child
safety seat.
Weight class 9-18 kg
(forward-facing))
This means: The child safety seat is universally
approved for installation using the tested
3-point automatic seatbelt (approved in
accordance with ECE R 16 or comparable
standard) in all vehicles.
• This is a "universal" child restraint system. It
is approved in accordance with ECE R 44/04
for general use in vehicles and will fit most,
although not all, vehicle seats.
2
is approved for three different methods of installation:
• It is likely that the restraint system will fit
correctly if the vehicle manufacturer declares
in the owner's manual that the vehicle is
suitable for a "universal" child restraint
system for this age group..
• This child restraint system has been
categorised as "universal" using
stricter conditions than was the
case with earlier models that did not
bear this additional information.
If you are in any doubt, please refer to the
manufacturer or the vendor of the child restraint
system.
3.
"Universal"
with the vehicle's 3-point
seatbelt.
Weight class 15-25 kg
(forwardfacing)
This means: The child safety seat is universally
approved for installation using the tested 3-point
automatic seatbelt (approved in accordance
with ECE R 16 or comparable standard) in all
vehicles.
• This is a "universal" child restraint system. It
is approved in accordance with ECE R 44/04
for general use in vehicles and will fit most,
although not all, vehicle seats.
• It is likely that the restraint system will fit
correctly if the vehicle manufacturer declares
in the owner's manual that the vehicle is
suitable for a "universal" child restraint
system for this age group.
• This child restraint system has been
categorised as "universal" using stricter
conditions than was the case with earlier
models that did not bear this additional
information.
If you are in any doubt, please refer to the
manufacturer or the vendor of the child
.
restraint system

Publicidad

loading