Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
1. Lower tray
2. Upper tray
3. Handle
4. Plates
5. Plate release button
6. Soaker tray
7. Control panel
8. Cooking with lower and upper plate
9. Cooking with upper plate
10. Cooking with lower plate
11. Increase cooking temperature
12. Decrease cooking temperature
13. Display - temperature indicator
14. Display - time indicator
15. Increase cooking time
16. Decrease cooking time
17. CANCEL/Standby
18. START/Begin
19. Operation indicator
IMPORTANT WARNINGS
Be careful when handling the appliance
while cooking. Open and close the
appliance using only the handle. Do not
touch the upper tray during or immediately
after cooking, as it may be hot.
The use of oven mitts when handling the
appliance is recommended to avoid burns.
Never use metal utensils on the plates, as
they can damage the non-stick coating.
Always allow the appliance to cool down for
30 minutes before cleaning it.
14
OPERATION
Before first use
Take the appliance out of the packaging
and remove all packing material, except the
appliance's rating plate.
Remove the plates by pressing the plate
release button.
Before using the appliance for the first
time, wash the plates with warm water and
a neutral cleaning product. Then dry the
plates very well.
Insert the plates, making sure they are put
correctly in place.
The plate has two sides, one threaded and
one smooth; choose the desired side when
inserting the plate.
Make sure that the soaker tray is inserted
correctly in the back of the appliance.
Usage
Plug the appliance in; the appliance will
beep; all indicators will light up and then
go off. The word 'OFF' will appear on the
display.
Select the cooking function (lower and
upper plate, upper plate, lower plate) by
pressing the corresponding button; the
default time and temperature appear on
the display.
Adjust the temperature and cooking time
by pressing the corresponding temperature
and time increase or decrease buttons;
the appliance beeps when the buttons are
pressed.
Press the START button to start preheating;
the word 'PRE' will appear on the display
in the time display area, the temperature
indicator in the temperature display area,
and the operation indicator will turn blue.
www.flama.pt
Publicidad
