Publicidad
Idiomas disponibles
Idiomas disponibles
When preheating is over, the set time will
flash in the time indicator of the display.
The appliance will beep and the operation
indicator will turn green.
Press the START button.
NOTE - If the START button is not pressed
within 15 seconds, the appliance will go on
standby mode; The word 'OFF' will appear
on the display.
Place the food on the plate and press the
START button; countdown will start and the
operation indicator will turn yellow.
When countdown is over, the device will
beep, the word 'donE' will appear on the
display, and the operation indicator will
turn red.
Press the CANCEL button in standby mode
and the word 'OFF' will appear on the
display.
Open position (180º)
WARNING - Be very careful when placing
the upper tray in the open position, as it is
hot after preheating and can cause burns.
When preheating is over and the operation
indicator is green, use the handle to move
the upper tray to the open position.
Using a heat-protection glove (or similar),
press the top tray to level it with the handle.
Then move the handle with the top tray to
the open position.
NOTES:
For a better result, add some cooking oil or
cooking spray to the food.
Close the grill to reduce the preheating
time.
Use only the handle to open or close the
top tray.
While cooking, you can press the CANCEL
button to stop the grill operation and
change which plate to use (upper, lower, or
both).
While cooking, press the increase or
decrease buttons to adjust the time and/
or temperature; the appliance assumes
the new time/temperature setting after 3
seconds.
When the appliance is on Standby mode,
press the temperature increase and
decrease buttons simultaneously for 3
seconds to change from degrees Centigrade
(°C) to degrees Fahrenheit (°F).
The appliance memorizes the last setting,
can memorize the last temperature and
time setting; when turning on the unit
and selecting the desired function, the
temperature and time setting of the last
use will appear on the display.
The
appliance
temperature and time setting; when turning
on the appliance and selecting the desired
function, the temperature and time setting
of the last use will appear on the display.
English
memorizes
the
last
15
Publicidad
