ANALOG RADIO
"STEREO" lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1
Press
repeatedly to select FM or AM.
2
Press
to search for a station automatically.
(or)
Press and hold
until "M" flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
8
ENGLISH
2
Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press
.
2
Turn the volume knob to select a preset number, then press the
knob.
Other settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
2
Repeat step
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
TUNER SETTING
RADIO TIMER
( 7)
SSM
SSM 01–06 /SSM 07–12 /SSM 13–18: Automatically presets up to 18
stations for FM. "SSM" stops flashing when the first 6 stations are stored.
Select SSM 07–12/SSM 13–18 to store the following 12 stations.
LOCAL SEEK
ON: Searches only FM stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
.
Default: XX