Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Operation
Sauna program:
Temperature:
1
Individual program
2
80 °C
3
90 °C
4
95 °C
Prerequisite/note for the operation described below:
d
The control unit is in standby mode. The time appears in the display.
.
The selected program starts automatically three seconds after the last press of a button.
5.4.
Starting sauna operation
RISK OF FIRE!
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
1.
Press the B button.
.
The operating mode selected most recently and its settings appear in the display.
'
If other values are to be used for the selected program - see Chapter 6.
Or:
2.
Select the desired sauna program using the up/down
.
Each further press of the button displays the next sauna program.
3.
Start sauna operation using the
.
At the end of the heating phase the bathing visitor
ready for bathing.
PAGE 10
Button:
A
B
C
D
E
buttons.
button.
symbol appears in the display. The sauna is
Description:
Light button
I/0 button
Left/Right buttons
Up/Down buttons
OK button
SaunaP
UR
5070178/07.02
Publicidad
