Publicidad
FRAME INSTALLATION
1. Place the vanity frame in position against the wall and plumbing. Using a level, adjust the feet under the rear legs until the vanity
frame is level, side to side.
2. Using a level, adjust the feet under the front legs until the vanity frame is level, front to back. Re-check level side to side and
diagonally (corner to corner) and adjust as necessary.
1
2
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
Part no. CB-209-1336 07/28/20
6
800.877.2376
www.robern.com
Freestanding Vanity Leg Base Accessory
Publicidad
