Publicidad
FRAME INSTALLATION
3. Secure the vanity frame to the wall using the supplied structural bolts [203-1256].
NOTE: To ensure user safety and correct installation, properly anchor the vanity into studs at the positions shown (Fig 3A). If there are
no studs in these areas, 3/8" holes can be added to the top of the frame member in locations which align with the wall studs, or use the
toggle bolts [203-1293] provided, in the hole locations as shown (Fig 3B). Follow instructions shown on toggle bolt packaging.
Refer to instruction included with vanity to complete installation.
3a
3b
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
[203-1256]
[203-1270]
[203-1256]
5/16" x 2 1/2"
4-Structural Bolt
T-30 Driver
5/16" x 2-1/2"
4-Boulon
Structural Bolt
4-Perno estructural
[203-1293]
Toggle Bolt
7
Part no. CB-209-1336 07/28/20
Freestanding Vanity Leg Base Accessory
Publicidad
