Emos P5630S Manual De Instrucciones página 19

d. Confirm temperature calibration by pressing
to the next advanced setting (setting the Open Window function, marked by
the number 2 in the top right corner of the screen).
e. To go back to settings of the thermostatic head, press
main screen, press
7. Setting the Open Window Function
a. To set the Open Window function, hold the
opens the thermostatic head's settings.
b. To select the Open Window function, repeatedly press the
Window function settings are selected when the
Press to confirm the selection of the setting.
c. Confirming the previous step takes you to the advanced settings of the
thermostatic head. To navigate in the advanced settings, press
There, the Open Window function is marked by the number 2 in the top
right corner of the screen.
d. Once 2 and the
set the temperature at which the Open Window function should activate. You
can set the temperature to between 5 °C and 25 °C, or you can turn off the
function completely. If you wish to turn off the function, turn the wheel on the
thermostatic head counter-clockwise until two dashes appear on the screen.
e. To confirm your setting of the Open Window function, press the
Confirming redirects you to the next advanced setting (setting the Auto Lock
function, marked by the number 3 in the top right corner of the screen).
f. To go back to settings of the thermostatic head, press
main screen, press
8. Automatic Screen Lock Function
a. To set the Auto Lock function, hold the
the thermostatic head's settings.
b. To select the Auto Lock function, repeatedly press the
Lock function is selected when the
to confirm the selection of the setting.
.
icon appear in the top right corner of the screen, you can
.
19
. Confirming redirects you
. To return to the
button for 5 seconds. This
button. Open
icon starts flashing.
. To return to the
button for 5 seconds. This opens
button. The Auto
icon starts flashing. Press
.
button.