Emos P5630S Manual De Instrucciones página 22

Boost interval length settings are marked by the number 6 in the top right
corner of the screen.
d. Once the number 6 appears in the top right of the screen, you can use the
rotary wheel on the thermostatic head to set the length of the interval of
the Boost function. The value can be set to between 100 and 900 seconds.
e. Confirm your chosen Boost interval length by pressing
redirects you to the next advanced setting (setting of the start/end of working
temperature, marked by the number 7 in the top right corner of the screen).
f. To go back to settings of the thermostatic head, press
main screen, press
12. Setting the Start/End Working Temperature
a. To set the start/end working temperature, hold the
This opens the thermostatic head's settings.
b. To select the start/end working temperature settings, repeatedly press the
button. The start/end working temperature option is selected when
the icon starts flashing. Press
the setting.
c. Confirming the previous step takes you to the advanced settings of the
thermostatic head. To navigate in the advanced settings, press
start/end working temperature settings are marked by the number 7 in the
top right corner of the screen.
d. Once the number 7 appears in the top right of the screen, you can use the
rotary wheel on the thermostatic head to set the start/end working temper-
ature. The value can be set to between 0.5 °C and 1.5 °C.
e. To confirm the start/end working temperature setting, press the
Confirming redirects you to the next advanced setting (Type of Valve Control,
marked by the number 8 in the top right corner of the screen).
f. To go back to settings of the thermostatic head, press
main screen, press
.
to confirm the selection of
.
22
. Confirming
. To return to the
button for 5 seconds.
. There,
button.
. To return to the