Emos P5630S Manual De Instrucciones página 23

13. Valve Control
a. To set Valve Control, hold the
thermostatic head's settings.
b. To select the Valve Control settings option, repeatedly press the
The Valve Control function is selected when the
Press to confirm the selection of the setting.
c. Confirming the previous step takes you to the advanced settings of the
thermostatic head. To navigate in the advanced settings, press
There, Valve Control settings are marked by the number 8 in the top right
corner of the screen.
d. Once the number 8 appears in the top right of the screen, you can use the
rotary wheel on the thermostatic head to set the type of valve control. Value
= 0: control in accordance with the modes you have set; value = 1 automatic
control based on current temperature.
e. To confirm your Valve Control settings, press the
redirects you to the next advanced setting (Reset Thermostatic Head, marked
by the number 9 in the top right corner of the screen).
f. To go back to settings of the thermostatic head, press
main screen, press
14. Reset the Thermostatic Head
a. To Reset the Thermostatic Head, hold the
opens the thermostatic head's settings.
b. To select the Reset the Thermostatic Head settings option, repeatedly
press the button. The Reset the Thermostatic Head option is selected
when the
of the setting.
c. Confirming the previous step takes you to the advanced settings of the
thermostatic head. To navigate in the advanced settings, press
the Reset the Thermostatic Head option is marked by the number 9 in the
top right corner of the screen.
button for 5 seconds. This opens the
.
icon starts flashing. Press
23
button.
icon starts flashing.
button. Confirming
. To return to the
button for 5 seconds. This
to confirm the selection
. There,
.