Publicidad
Idiomas disponibles
Idiomas disponibles
5.3.2
Connecting to the Homematic IP cloud via Wired access point
If you want to control your Homematic IP Wired devices flexibly via the
smartphone app, they can be connected to the Homematic IP cloud. To
do this, proceed as follows:
•
Open the Homematic IP app on your smartphone.
•
Connect the Homematic IP Wired Access Point via the smart-
phone app to the Homematic IP cloud, as described in the cor-
responding manual.
•
Select the menu item "Add device".
•
After connecting the power supply, the device's pairing mode is
active for 3 minutes.
You can manually start the pairing mode for another 3 minutes by
pressing the system button (D) briefly using a pointed object (e.g. a
pen) (see figure 9).
•
Your device will automatically appear in the Homematic IP app.
•
To confirm, enter the last four digits of the device number (SG-
TIN) in your app or scan the QR code. The device number can be
found on the sticker supplied or attached to the device.
•
Wait until pairing is completed.
If pairing was successful, the LED (D) lights up green. The device
•
is now ready for use.
•
If the LED lights up red, please try again.
•
Select the desired solution for your device.
•
In the app, give the device a name and allocate it to a room.
If you are already using Homematic IP devices in your smart home
system or if you want to combine your Homematic IP Wired devices
with wireless Homematic IP components, you can also connect the
Homematic IP Wired devices to an (installed) access point. There-
fore, connect the Homematic IP Wired Access Point to the (previ-
ously installed) Homematic IP Access Point, as described in the user
manual. Then proceed as described above to connect the glass dis-
play.
Start-up
33
Publicidad
