Technical specifications
10
Technical specifications
Device short description:
Supply voltage:
Current consumption:
Power consumption in
Standby:
Cable type and cross section:
Installation:
Protection rating:
Protection class:
Ambient temperature:
Dimensions (W x H x D):
Weight:
Subject to modifications.
Instructions for disposal
Do not dispose of the device with normal domestic waste! Electron-
ic equipment must be disposed of at local collection points for waste
electronic equipment in compliance with the Waste Electrical and
Electronic Equipment Directive.
Information about conformity
The CE mark is a free trademark that is intended exclusively for the
authorities and does not imply any assurance of properties.
For technical support, please contact your retailer.
36
HmIPW-WGD-PL
24 V
, +/-5 %, SELV
DC
110 mA max.
0.6 W
Rigid cable
0.12-0.50 mm²
only in normal commercial switch
boxes (device boxes) in accordance
with DIN 49073-1
IP20
III
-5 to +40 °C
96 x 96 x 40 mm
131 g