How To Operate; Cord Storage - Gaggia ML Steel Instrucciones De Uso

ENGLISH

HOW TO OPERATE

1. Fill the mill beaker (fig. 2)
Do not fill higher than two or
three millimeters below the
rim. You may use the cover
for this purpose.
A maximum filling results in
a quantity of ground coffee
which is enough for about 10
cups.
2. Place the cover (fig. 3)
3. Insert the main plug into a wall socket.
4. Holding the coffee mill with both hands, press and hold switch (B) (fig. 4)
With a maximum filling the
operation takes about 30
seconds.
The longer you continue the
operation, the finer the results
will be.
Note: do not over-
process!
5. Release switch (B)
6. Remove the main plug from the wall-socket.
7. Tap the cover to remove ground coffee sticking to it (fig. 5). Then open the coffee mill (fig. 6).

CORD STORAGE

You can store excess main cord
by winding around the bottom of
the main unit (Fig. 7).
CLEANING
First unplug the appliance.
Clean the appliance after every use. Never use caustic or abrasive cleaning agents.
The motor base can be wiped clean with a damp cloth.
NEVER SUBMERGE THE MOTOR BASE UNDER WATER OR ANY OTHER LIQUID.
2
4
6
• 4 •
3
5
7