Husqvarna CT 36A/A-V Manual De Usuario página 13

4. Set the engine ON/OFF switch to ON.
5. Pull the starter rope handle slowly until you feel
some resistance. When you feel resistance, pull the
starter rope handle quickly and with force.
Note:
Do not twist the starter rope around your
hand.
6. Continue pull the starter rope handle until the engine
starts.
CAUTION:
rope to full extension and do not let go
of the starter rope handle. Release the
starter rope slowly. If you do not obey
these instructions it can cause damage
to the engine.
7. Open the choke control gradually until it is fully open.
8. Let the engine operate at idle speed for 2–3 minutes.
1452 - 003 - 30.01.2023
Do not pull the starter
9. Hold the product securely at the handle with two
hands. Move the throttle control to increase the
engine speed, but do not release the handle.
To adjust the blade pitch
The blade pitch is adjusted gradually.
• For products with a blade pitch knob (A):
A
a) To increase the blade pitch, turn the blade pitch
knob clockwise.
b) To decrease the blade pitch, turn the blade pitch
knob counterclockwise.
• For products with a Pro-Shift
B
a) To increase the blade pitch, pull the Pro-Shift
lever up in the direction of the handle.
b) To decrease the blade pitch, push the Pro-Shift
lever down.
®
lever (B):
®
®
13