Teac VRDS-701T Manual Del Usuario página 9

When the main unit and the remote control both have buttons
with the same functions, this manual explains how to use one of
the buttons. The other corresponding button can be used in the
same manner.
a
STANDBY/ON button
Press this to put the unit into standby mode or turn it on.
b
Number buttons
Use these to select and program tracks, for example.
c
REPEAT button (¼)
Use this to change the repeat playback setting (page 17).
Remote control parts and functions
d
Tray OPEN/CLOSE (-) button
Press this to open and close the disc tray.
e
DIMMER button
Press this to adjust the brightness of the main unit's display.
f
DISPLAY button
g
INFO button
Press this to show playback format information (page 15).
h
CLEAR button
Use this to clear programmed tracks.
i
MENU button
Press this to enter setting mode (page 20).
Press this when in setting mode to return to the previous screen.
j
PLAY MODE button
Press this to switch between program and shuffle playback
modes.
k
Skip (., /) buttons/
up/down (k, j) buttons
Use these to skip to the previous or next track.
Press and hold these buttons during playback to search
backward/forward.
When the menu screen is open
Use these buttons to select setting values.
l
Play/pause (7/9) button/
ENTER button
Press this when stopped or paused to start or resume playback.
Press this during playback to pause.
When the menu screen is open
Press this to start or confirm setting value selection.
m
Stop (8) button
Press this during playback to stop playback.
EN
9