Publicidad
PRESSURE GAUGE
TUTORIAL
OCTOPUS
TUTORIAL
16
8.4 Pressure Gauge
*Sold separately for Neptune III basic and some configurations.
Single piece brass body: copper beryllium coiled inner mechanism;
bourdon tube; rack and pinion movement for smooth and precise
operation; tempered glass transparent window; plastic cover with
loops for fixing: graduation 350 BAR/5000 PSI, full scale.
Graduation display:
Clear, easy to read dial design; red zone from 0 to 50 BAR / 0 to 725
PSI; increments 10 BAR, all over the scale.
Dual graduation.
Fluorescent background will maintain readability for some time after
being exposed to light.
PRESSURE GAUGE ASSEMBLY
Use a 4mm Allen wrench to remove the HP port plug on the first
stage, then screw the loose end of the pressure gauge hose into the
open port and tighten by hand using a 14mm wrench without using
.
excessive force
8.5 Octopus
*Sold separately for Neptune III basic and some configurations.
Standard downstream valve with dive-predive switch, no adjustment
knob.
Weight (without hose) 230g
Quick connection male part assembled on the Octopus.
Quick connection Hose length 120cm
Yellow Extraflex hose.
Static intermediate pressure 9.5-9.8bar
OCTOPUS ASSEMBLY
Use a 4mm Allen wrench to remove the LP port plug on the first stage
adjacent to the hose of the primary second stage, then screw the
loose end of the Octopus hose into the open port and tighten by hand
using a 14mm wrench without using excessive force
NEPTUNE III Package Owner's Manual rel. 2.1
.
Publicidad
