Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING!
• Do not attempt to disassemble the unit for cleaning
purposes.
• Always unplug the unit from the mains socket before
cleaning it.
• Never immerse the unit, power cable or plug in water
or any other liquid, to avoid any electrical hazard. Never
spray them with liquids or rinse them under running
water. The interior of the unit and all of its electrical
components must be kept dry.
NOTE: Never use solvents, chemical or abrasive cleaning
products, wire brushes, sharp objects or scouring pads
to clean the unit. Do not use turpentine, benzene, thinner
or alcohol to clean the unit.
• Clean the unit on a regular basis.
• Wipe the unit's surfaces, air inlets and air outlets with a soft
cloth/sponge lightly dampened with water or a small amount
of soapy water. Thoroughly dry the unit with a soft dry cloth
after cleaning it.
• To ensure the air circulates well in the motor unit, make sure
that the unit's air inlets do not get dusty.
Power cable storage
When putting the unit away, wind the power cable around the 2 storage hooks located
at the back of the unit. Press the inner ends of the 2 concealed hooks to pop them out,
then wind the cable.
27
EN
Publicidad
