Publicidad
Idiomas disponibles
Idiomas disponibles
HEDGE TRIMMER SAFETY WARNINGS
Keep all parts of the body away from the blade. Do not
remove cut material or hold material to be cut when
blades are moving. Blades continue to move after the
switch is turned off. A moment of inattention while oper-
ating the hedge trimmer may result in serious personal
injury.
Carry the hedge trimmer by the handle with the blade
stopped and taking care not to operate any power
switch. Proper carrying of the hedge trimmer will decrease
the risk of inadvertent starting and resultant personal
injury from the blades.
When transporting or storing the hedge trimmer, al-
ways fit the blade cover. Proper handling of the hedge
trimmer will decrease the risk of personal injury from the
blades.
When clearing jammed material or servicing the unit,
make sure all power switches are off and the switch
trigger is locked out in the off position. Unexpected
actuation of the hedge trimmer while clearing jammed
material or servicing may result in serious personal injury.
Hold the hedge trimmer by insulated gripping surfaces
only, because the blade may contact hidden wiring.
Blades contacting a "live" wire may make exposed metal
parts of the hedge trimmer "live" and could give the op-
erator an electric shock.
Keep all power cords and cables away from cutting
area. Power cords or cables may be hidden in hedges
or bushes and can be accidentally cut by the blade.
Do not use the hedge trimmer in bad weather condi-
tions, especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
DANGER — Keep hands away from blade. Contact
with blade will result in serious personal injury.
Maintain a firm grip on handle while cutting.
WARNING — Only use with handle and guard properly
assembled to hedge trimmer. The use of the hedge
trimmer without the proper guard or handle provided may
result in serious personal injury.
Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and result in
serious personal injury.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Following this rule will reduce
the risk of serious personal injury.
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or loose string which
can become entangled in the cutting blade and create a
risk of serious personal injury.
Before starting the power tool, make sure the blade is
not in contact with any object.
Stop the unit, make sure the switch trigger is locked out
in the off position, and make sure the blade has stopped
before setting the unit down.
Never cut any material with a diameter larger than 5/8 in.
Never use water or any liquids to clean or rinse off your
product and do not expose the product to rain or wet
conditions. Store indoors in a dry area. Corrosive liquids,
water, and chemicals can enter the product's electronic
components and/or battery compartment and damage
electronic components and/or the battery pack, which can
result in a short circuit, increased risk of fire and serious
personal injury.
Always stop the motor when cutting is delayed or when
walking from one cutting location to another.
Keep unit clean of clippings and other materials. They
may become lodged in the cutting blades.
Store the unit inside in a dry place, either locked up or
up high to prevent unauthorized use or damage. Keep
out of the reach of children or untrained individuals.
Replace blade cover when unit is not in use.
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean, and free from debris.
Clean after each use; see storage instructions.
Secure the unit while transporting.
Battery operated units do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when unit
is not operating.
Make sure the switch trigger is locked out in the off posi-
tion before making any adjustments, cleaning, storing, or
removing material from the unit, or when not in use.
When transporting or storing the power tool always
fit the cutting device cover.
Use this product only with charger HOMCC01.
Save these instructions. Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also.
Page 4 — English
Publicidad
