Urbanista PHOENIX Manual página 4

U S E R M A N U A L
URBANISTA PHOENIX
Thank you for choosing an Urbanista product.
POWER ON AND OFF
The earphones automatically power on and off as you open and
close the charging case lid. Five minutes of disconnect or 30 minutes
of inactivity will automatically power off. If your earphones are
automatically powered off outside the charging case, you can press the
left and right sides separately for 5 seconds to power them on.
FIRST-TIME PAIRING AND RECONNECTING
Open the charging case lid to initiate first-time pairing. The LED will
first indicate the charging case battery level, then start flashing to
indicate pairing mode. Go to the Bluetooth settings on your device and
select "Urbanista Phoenix" to connect. The LED will stop flashing as
the earphones successfully connect. The earphones will automatically
try to reconnect to the last connected device(s) every time they are
powered on.
MULTIPOINT CONNECTION
Phoenix can be connected with two Bluetooth devices simultaneously
through Multipoint Connection. It allows you to seamlessly switch
between devices, such as a computer and phone, without having to
disconnect first.
Pair and connect to a second device
• Open the charging case lid to activate pairing mode
• The earphones will connect to your first device but remain in
pairing mode
• Go to the Bluetooth settings on your second device and select
"Urbanista Phoenix" to pair and connect
• The earphones are now connected to both devices
The earphones can pair with and store up to 8 devices, and will
multipoint connect to the last two devices every time it's powered on.
Multipoint does not allow audio from two devices to be played at the
same time.
TOUCH CONTROLS
Use the double- and triple-tap commands to control music and calls.
Left and right side long-press can be customized through the Urbanista
Audio app.
• Play/Pause: Double-tap left or right side.
4
( E N )