Use guide for vibration mop assembly
1. Press the button on tank
and pull to remove.
Water Tank
Attach mopping holder to the
water tank.
Mop Cloth Holder
Mop Cloth
4. Push the vibration
mopping assembly in
the main unit until a
"click" sound is heard;
9
2. Remove the rubber plug, and fill the
tank with water to the MAX line;
Water inlet/outlet
Adhere the special rag for vibration mopping
to the bottom of the vibration mopping assembly
by aligning it along the middle seam, and you
can clean/replace it by simply peeling it off;
Special rag for vibration mopping
Cautions
1. Fill the tank with municipal water
instead of purified water;
3. Do not use the mopping function
on floor carpets;
5. Keep the terminal dry and clean
before pushing in the vibration
mopping assembly.
Terminal
2. Do not add washing powder, laundry
detergent, cleaning agents, disinfectants,
hand sanitizers, unknown oily liquids,
and alkaline substances;
4. Do not fill the tank with hot water to prevent
its distortion at high temperature;
6. The mopping water volume can be
adjusted in the App.
Water speed