Maintenance of dust box (cleanup as required)
1. Remove the dust box:
Pinch the dust box with your two
fingers, and press the dust box
release key with another hand
to remove the box.
Dust-box release key
3. Remove the filter assembly according to
text prompts on the filter assembly;
Filter assembly
4. Clean the
dust box, filter
assembly, and filter
cotton; after cleaning and
drying completely, re-install
them, and close the rear cover,
check whether it is installed in
place;
(Both of the dust box and the filter
assembly can be washed with
water)
Dust box
Filter cotton Filter assembly
Dry in the air
Daily maintenance and service
2. Dust removal: open the dust box,
and remove dust from the box;
5. Clean dust from the dust collection port of the dust box.
16