Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of side brushes
By keeping the side brush color
consistent with the side brush slots on
the base of the main unit,push the side
brush into the slot directly until a "click"
sound is heard;
Robot charging
Before first use, put robot on the station
closely, and make sure robot is in charging
status for first use, then start robot.
For future use, robot can automatically goes
to the charging base when cleaning is
finished.
To remove the side brush,turn the
robot's bottom upwards,and grasp the
side brush by its rubber-coating leg(take
care not to pull on hair bundles of the
side brush with brute force)with your two
hands to pull it off.
Instructions prior to use
1. Prior to startup, clear away sundries
on the floor, and remove easily falling,
fragile, valuable, and possibly
hazardous items;
2. Use relevant objects to block the robot, or establish a virtual wall in
the App;
3. If there is an area that does not need cleaning or may trap the robot,
you can add a prohibited area or virtual wall at the appropriate location in
the map of the App, to prevent the robot from entering specific areas.
Cautions
1. If the robot cannot be charged, check whether the charging chips on the
robot's bottom are blocked by fair bundles of left and right side brushes.
If yes, manually rotate relevant side brush to eliminate such blockage.
10
10
Publicidad
