Publicidad
Step 13
Step
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D429 and D549).
å
Fasten the EXTENSION SLIDES (40MC) to the DRAWER SIDES (D429 and D549). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a PULL (190K) to a DRAWER FRONT (M). Use two GOLD 1" MACHINE SCREWS (50S).
å
Repeat this step for the other drawer.
2
3
4
www.sauder.com/service
(4 used)
Open end
10A
1
D429
M
190K
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
GOLD 1" MACHINE SCREW
(4 used for the PULLS)
3S
Center the screw in the oval hole.
427360
6
50S
Screw head -
turn CAM to line
up holes in the
SLIDES with holes
in DRAWER SIDES
10A
D549
2
3
4
Drawer Slide
Open end
1
Page 19
Publicidad
