Descargar Imprimir esta página

omi A30 Manual De Uso Y Mantenimiento página 7

Publicidad

OMI srl
1.5 Safety symbols
Air outlet point
Air inlet point
Condensate drain point
2.0 RECEIPT AND STORAGE
2.1 Receipt
Upon receipt the client must carefully examine the aftercooler thoroughly in order to verify the integrity and the availability of all items
listed on the shipping documents.
All claims for missing goods and/or damages have to be notified to us or to the nearest retailer within 8 (eight) days from date of
receipt.
It is necessary that the aftercooler is kept in vertical position as shown on the packaging.
2.2 Unpacking
Unpacking operation have to be done according to the instruction listed under chap. 3 (Installation).
After the removal of the packaging material, check whether the aftercooler is damage free, and before any action is taken read
carefully this manual.
Keep the packaging in case of need and/or the aftercooler has to be returned to the supplier.
3.0 INSTALLATION
3.1 Foundation
Where the installation of the aftercooler is concerned, no special foundation is needed.
The ambient temperatures should not be lower than + 5 °C or higher than + 45 °C.
More over the unit should be placed in a room away from direct sunlight, rain and with proper ventilation.
3.2 Installation
With reference to the technical data, before proceeding with any operation, make sure that the air system pipes are clean and free
from any contaminating particle.
a.
Mount the condensate separator at the air outlet point.
b.
Connect the aftercooler to the air system by following the symbols of the stickers explained on par. 1.5.
c.
Connect the aftercooler to the cooling water system
d.
Connect the condensate discharge pipe to the drainage system according to local regulation. It is forbidden to discharge the
condensate directly into the water system therefore it is recommended to install a water-oil separator for the treatment of the
condensate.
4.0 MAINTENANCE
4.1 Routine maintenance
For best performances of the aftercooler the following maintenance program is recommended:
Weekly, check the regular condensate discharge.
5/16
A-AV
Cod. 710.0076.01.00 – Rev.0D– 09.2016
serie

Publicidad

loading