turbionaire trend Manual De Instrucciones página 12

A. REMOTE CONTROL PAIRING TO THE VENTILATION UNIT
Press the "RESET" button on the device to be connected to the remote control, for at least 5 seconds. When the LED flashes BLUE,
synchronisation mode has begun. To confirm the pairing, press any button on the remote control (except the "ON/OFF" key). The pairing is
complete.
B. UNPAIRING REMOTE CONTROL FROM THE VENTILATION UNIT
Press the "RESET" button on the device to be disconnected from the remote control, for at least 5 seconds. When the LED flashes BLUE,
synchronisation mode has begun. To unpair, press any button on the remote control (except the "ON/OFF" key). The cancelation of the
pairing is complete.
C. PAIRING A REMOTE CONTROL WITH SEVERAL VENTILATION UNITS
It is possible to control several ventilation units (without the upper limit for the associated devices in the range of the remote control). In this
case, all the remote control functions will work on all the ventilation units
D. MOUNTING THE REMOTE CONTROL ON A FIXED SURFACE
The remote control is equipped with magnetic adhesive tape. One part will be positioned on a fixed surface, and the other part will be
attached to the remote control. In this way, the possibility of losing the remote control will be reduced.
5. DESCRIPTION OF REMOTE CONTROL
ON/ OFF
1. Unit ON/OFF
2. LED indicator: Red static indicator if off / Blue static indicator if on
12