turbionaire trend Manual De Instrucciones página 14

BOOST MODE
1. Short press of the BOOST Button increases the fan speed to maximum step 7 for 5 minutes (standard configuration) after which the
BOOST function will be deactivated.
2. Longer pressing of the BOOST button, for at least 5 seconds (green indicator LED), followed by pressing the buttons
will lead to the adjustment of the BOOST mode TIMER with time intervals of 1, 3, 5, 10, 20 and 30 minutes. The color of the LED to
confirm the range traveled is Purple. For intervals of 1 minute at maximum speed, as well as 30 minutes at minimum speed, the color of
the confirmation LED will be flashing Yellow.
3. Any pressing of any button except the ON/OFF, LED ambient lighting (for models equipped with this function) and Variator buttons,
cancels the BOOST mode.
4. Led indicator: YELLOW flashing
LIGHT ON/OFF
Briefly press the "Ambient light" button, then the LED is on/off (only for models equipped with this function).
DIMMER BUTTON
When it is pressed successively, the intensity of the LED indicator positioned on the side of the device will increase: after reaching the
maximum, the intensity restarts from the minimum (off) and increases again: after a short period of time in which DIMMER button was not
pressed, the intensity is considered set.
RESTORE TO FACTORY SETTINGS
Press the "RESET" button on the device for at least 5 seconds, when the LED flashes BLUE, release the button, then press it again the "RESET"
button until the LED indicator turns RED, and the setting from the factory is restored.
14