Descargar Imprimir esta página

Yamato G800-2T Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Cod. 94716
m). The motor must not be operated with excessive rotary speed. The operation of the motor
with excessive rotary speed raises the risk of injury. Parts which affect the rotary speed must not
be altered or replaced.
n). Regularly check for leakage or traces of abrasion in the fuel system, such as porous pipes,
loose or missing clamps and damage to the tank or tank cap. Before use all defects must be
repaired.
o). Work only in daylight or in good artificial light.
p). Never pick up or carry a machine while the engine is running
q). Stop the engine:
- whenever you leave the machine
- before refueling
r). Before checking or adjusting the generator or the motor, the ignition plug and the ignition
wire respectively must be removed to prevent accidental starting.
4). Maintenance and storage
a). Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
b). Never store the equipment with petrol in the tank inside a building where fumes can reach
an open flame or spark.
c). Allow the engine to cool before storing in any enclosure.
d). To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol
storage area free of vegetative material and excessive grease.
e). Replace worn or damaged parts for safety.
f). If the fuel tank has to be drained, this should be done outdoors.
INTENDED USE
Portable generators are internal combustion engines for generating electricity. They are used when
temporary power is needed or for utilizations in distance such as: camping, excursion, logging in
the forest, mowing grass in gardens, etc.
WARNING:
Because of voltage fluctuations which may occur during working, the generator should not
contact to below appliances:
-TV sets
- Audio-video-appliances
- Products or appliances with electronic control
15

Publicidad

loading

Productos relacionados para Yamato G800-2T