Descargar Imprimir esta página

Yamato G800-2T Manual De Instrucciones página 23

Publicidad

Idiomas disponibles

Idiomas disponibles

Cod. 94716
Generator running
rough
Appliance is not
working or shops
working
STORING
Transporting the generator in a car, please empty the fuel tank and engine oil completely first to
avoid the leakage.
Empty the fuel
1. Place the generator on even and stable surface. Warm up the engine for several minutes and
then stop it.
3. Loosen the fuel drain screw on carburetor and drain fuel into a container thoroughly.
4. Tighten fuel drain screw
Store the machine, operating instructions and where necessary the accessories in the original
packaging. In this way you will always have all the information and parts ready to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Store the generator in dry and well ventilated surroundings and with the fuel tank empty. Do not
store fuel next to the generator.
Information on disposal for users of waste electrical & electronic equipment.
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to
designated collection points, where they will be accepted on a free of charge basis.
Disposing of these products correctly will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could
otherwise arise from inappropriate waste handling. Please contact your local authority
for further details of your nearest designated collection point.
4. generator air filter may need
cleaning
5. generator fuel filter may be
blocked
1. has the choke been
elevated to the run position
2. has the generator got old
fuel in it, that has been sitting
still for a while
1. unplug the appliance from
the generator and check for
defect
6. Remove the air filter,
check to make sure that
the air filter is clean, if
required clean, dry and re-
install the air filter.
7. The internal in-line filter
may be blocked, contact
your service agent for a
service /replacement of the
fuel filter.
1. Check to make sure that
the choke has been
elevated to the run position.
If not elevate the choke to
the run position.
1, if so empty out the old
fuel and replace it with new
fresh fuel.
1. If appliance has a defect
follow the instructions as per
the operation/owners
manual.
23

Publicidad

loading

Productos relacionados para Yamato G800-2T