Descargar Imprimir esta página

JVC AA-V90EG Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
SUPPLY POWER TO CHARGER
1
Plug the AC Adapter/Charger's power
cord in to an AC outlet. The power
indicator comes on.
ATTACH BATTERY/BATTERIES
2
Remove the battery pack's protective cap
and attach while making sure the
marks are facing down and aligned with
the corresponding marks on the AC
Power Adapter/Charger.
•The Charge Indicator (1 or 2) begins
blinking to indicate charging has started.
CONFIRM STATUS
3
When the charger indicator stops blinking
but stays lit, charging is finished.
•If two batteries are attached to the
charger, they will be charged in the
order that they were attached.
Downloaded from:
https://www.usersmanualguide.com/
DETACH BATTERY/BATTERIES
4
Slide the battery or batteries in the
direction of the arrow and lift off.
•Remember to unplug the AC Adapter/
Charger's power cord from an AC outlet.
NOTE:
Perform charging where the temperature is
between 10° and 35°C. (20°–25°C is the ideal
temperature range for charging.) If the
environment is too cold, charging may be
incomplete.
BATTERY PACK CHARGING TIME
Battery Pack
1 Battery Pack
approx.
BN-V907U
100 min.*
* When charged at temperatures between 20°
and 25°C.
•When charging Battery Packs after a long
storage period, charging time will be longer
than the time indicated above.
2 Battery Packs
approx.
200 min.*
EN-5

Publicidad

loading