Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private / domestic use only. This product is
not designed for commercial/industrial use. The use of the product requires cer-
tain capabilities and skills. Always adjust according to the age of the user and use
for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Rubber board swing
Item number:
72175/00
Max. Height for Suspension: 250 cm
Min. Height for Suspension: 160 cm
Max. Body Weight:
100 kg
Dimension:
45 x 17,5 cm
Purpose:
Device powered by muscle power, for swinging in a
sitting position.
Minimum user age:
36 months
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Swing seat | 2 x Swing ropes | 2 x Metal brackets for swing seat | 1 x These
instructions
Other parts which may be included with the delivery in some circumstances are
not required.
SAFETY INSTRUCTIONS
• WARNING! Maximum load cannot exceed 100kg.
• WARNING! Minimum user age: 36 months.
• WARNING! Only for domestic use. Only suitable in the outdoors area.
• WARNING! To be used under the direct supervision of an adult.
• WARNING! Not suitable for children under 36 months. Risk of falling.
• WARNING! Not suitable for children under 36 months. Long cord. Strangula-
tion hazard. Small parts. Choking hazard.
• The owners of the swing as well as the competent supervisory personnel are
responsible for ensuring that all users follow the instructions in the operation
manual.
• Do not make any technical modifications.
• Changes to the original product must only be carried out according to manu-
facturer specifications.
• No one is permitted to gain access to the swing area during use.
• Never stand or kneel on the swing.
• Always hold yourself firmly with both hands.
• No objects of any kind must be in the vicinity of the swing zone (trees, walls,
fences, clotheslines).
• Make sure that you have a safety clearance of at least 2 m (front and back)
beyond the maximum reach of the swing and make sure the ground is level
and shock absorbing (e.g. grass) without any sharp edges or pointed objects,
obstacles, inclines, levels, steps or hard surfaces (e.g. concrete) etc.
• Clearance to stationary components on the side, such as the swing scaffol-
ding, must be at least 40 cm.
• Maximum raised height must not exceed 250 cm as measured from the
ground.
• Swinging components, such as a neighboring swing, must be placed at a di-
stance of at least 60 cm.
• In idle mode, the swing must be at least 40 cm and maximally 60 cm from the
ground.
• You should never install a swing in such a way that the user could be blinded
by sun rays.
• Suspension connectors shall be of a design that will prevent unintentional dis-
connection.
• The self-locking effect of the self-locking nuts or else lacquer can subside after
repeated loosening and tightening of the connection elements.
All images are examples of the design.
• When permanently irradiated with UV light, the material ages significantly
faster. To avoid premature aging and thereby extend the service life, you
should always store the product in a dry and dark place when not in use. Do
not permanently expose the product to wind, moisture, extreme tempera-
tures or sunlight.
INSTRUCTIONS ON ASSEMBLY
Prior to installation, carefully select and check the location where you will install
the swing. Please make sure that the swing carrier is adequately stable. Please
also take into account that swinging produces centrifugal forces that can put a
lot of strain on the swing carrier. Please consult an expert (statics expert, archi-
tect, carpenter) and ask how much load your swing carrier can tolerate. Mount
the metal brackets on both sides of the rubberized swing board from above as
shown in Fig. 1. Make sure the screws are tight. It should only be possible to
move the brackets slightly.
HANGING DEVICE AND ADJUSTMENT
The hanging points must be at least as far apart as the swing seat + 100 mm. The
swing is packaged with two ropes and adjustment eyelets, so that the height of
the swing can be variably aligned with any suitable hanging device (Fig. 2). Be-
fore hanging up the swing, insert the end of the rope through the bracket using
the eyelet (rear hook) (B) of one of the ropes. (Fig. 3) Then lay the rope double
for about half its length (approx. 20 cm) and guide the resulting loop from be-
hind through the open adjustment eyelet (B). (Fig. 4) Close the adjustment loop
through the loop so that the rope cannot be pulled out (Fig. 5). Repeat this pro-
cess with the second rope and eyelet of the swing. The hanging swing can now
be individually adjusted. No one should sit on the swing while making the adjust-
ments. When extending or reducing the length of the swing ropes please make
sure that the ropes remain equally long at all times. If the lengths of the ropes
differ, this will lead to circular pendulum movements of the swing. Make sure
that swing is set up in such a way that the person using the swing cannot reach
the ground with the tips of his or her toes. If in doubt, perform a few gentle test
swings.
MAINTENANCE AND STORAGE
Use only a dry or damp cloth to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/). Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone. Check the product for
damage or traces of wear and tear before and after each use.
You should also replace all the plastic parts after a maximum of 5 years to pre-
vent a possible failure of these parts.
Check the product for damage or traces of wear and tear before and after each
use.
We also recommend before each use:
• to check for the firm sitting of nuts and bolts, tighten if necessary
• to lubricate moving parts in order to minimize wear
• to check all covers of screws and sharp edges and replace if necessary
• to replace defective parts according to the manufacturer's instructions
• to check swing seats, chains, ropes and other means of attachments for evi-
dence of deterioration
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point in your area. Local waste management companies will be able to answer
your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/.
4/12
Publicidad
