Bresser Thermo Hygro Quadro NLX Manual De Instrucciones página 15

11 Snooze function
1. When the alarm sounds, press SNZ button to activate
the snooze function. The alarm will sound again in 5
minutes.
2. Press any other button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
12 Receiving measurements automatically
Once the power supply is enabled, the base station will dis-
play the measurement readings for indoors. Readings from
the outdoor sensor will be displayed within 3 minutes after
powering it on.
If no signal is received, proceed as follows:
Press the CH button for about 3 seconds to initate reception
of measurements again.
13 Weather trend
A weather trend for the next 12 hours is calculated from the
measured values and displayed graphically as follows:
1
Illustration 3: Symbols of the weather trend display
1 Sunny
3 Cloudy
5 Snow
3
2
4
2 Partly Cloudy
4 Rain
5
15 / 80