Hella Gutmann MT-HV Manual De Instrucciones página 47

MT-HV
6 Low-Voltage Measurement
NOTICE
You can alternatively use the measurement module MT 56 for measuring voltage, current and
resistance.
This section describes how to perform a low-voltage measurement in connection with the MT 77 measurement
module. The following pictures illustrate the exact proceeding.
6.1 Inserting the MT 77 into the MT-HV
Proceed as follows to insert the MT 77 into the MT-HV:
1. Press the unlocking button of the MT-HV.
The module releases from the module slot.
2. Draw the module out of the module slot.
3. Insert the MT 77 into the free module slot, pay attention that it locks into place.
Now the MT 77 is instered in the module slot of the MT-HV.
Low-Voltage Measurement Inserting
the MT 77 into the MT-HV
EN
47