HP LaserJet Pro 4002ne Guía De Configuración página 4

2
Connect printer
to network
hpsmart.com/setup
i.
Go to hpsmart.com/setup on a computer to set up the new printer with
EN
HP Easy Start software.
ii.
When prompted choose Ethernet, then use an Ethernet cable to connect the printer
to the same network as the computer.
Note: If the software cannot locate the printer on the network, enter the printer's IP
address manually in the software. With hpsmart.com/setup on the printer screen,
press OK. The IP address displays on the printer screen.
iii.
Continue with the steps in the software to add the printer to the network.
4
Anschließen des
Druckers an das Netzwerk
Do not use a USB cable for setup. See Reference Guide for
EN
more information.
USB-Kabel nicht für die Einrichtung verwenden Weitere Infor-
DE
mationen hierzu finden Sie im Referenzhandbuch.
Nie używaj kabla USB do konfiguracji Więcej informacji znaj-
PL
duje się w poradniku.
Podłączanie drukarki
do sieci