TM Electron TMHC109 Manual De Instrucciones página 12

(see table). The setting is indicated in the center of the
adjustment ring (fig. 4). It has total 20 settings, length from
0.5mm to 10mm .
If you are trimming for the first time, start by using the comb at
•
the maximum trimming length setting (#10) to prevent acciden-
tally trimming hairs too short. As you become familiar with the
settings, adjust Zoom Lock to desired trimming length. Zoom
Lock will "click" into position at each setting.
1. Switch the Trimmer ON.
2. To trim in the most effective way, move the Trimmer against
the direction of hair growth. Make sure the surface of the
comb always stays in contact with the skin (fig. 5).
NOTE: Since all hairs do not grow in the same direction, you
may want to try different trimming positions (i.e., upwards, down-
wards, or across).
Practice is best for optimum results.
12
ENGLISH