PNI Hunting 400C PRO Manual De Usuario página 23

1. The camera will check if the inserted SIM card is activated while searching for
signals in the "Test" mode;
2. If the SIM is not activated and has an active PIN code, "Pls input PIN-Code"
will appear on the screen after searching for the signal;
3. Then "SIM PIN" will become configurable on the "3G" menu page;
4. Enter your PIN in "SIM PIN"; the camera will turn off automatically. The
camera will automatically initiate the SIM card while searching for the signals
when you restart the camera after entering the PIN code.
Notes:
• "Pls input PIN-Code" will be displayed again if the wrong PIN is entered;
• Please re-try the PIN as if you see "Pls input PIN-Code" after searching for
the signal;
• The SIM is normally limited to being initialized 3 times; it will be blocked if
the PIN entered is wrong during these attempts 3 times. So, we suggest you
double-check your PIN before attempting again.
• Insert the SIM card into your phone to unlock it using the PUK code after a
3-fold attempt of activation based on the above steps.
ON/ OFF
If GPS is ON, GPS information will be printed on the image
Note: If the GPS signal is poor, GPS information will not be displayed
until the GPS signal is stronger.
GPS
Caution: We recommend that you activate the GPS function only
when you are out of buildings.
Inside buildings, this function is not functional, and it may be that the
satellite search procedure lasts a long time.
User manual
EN
23