Publicidad
Idiomas disponibles
Idiomas disponibles
■
Assembling the pedestal
●
Fix securely with assembly screws
●
Tighten screws firmly.
A
C
Front
Base
■
Set-up
●
Tighten assembly screws
first, then tighten them firmly to fix securely.
Rear view
Rear side
Arrow mark
Hole for pedestal
installation
Base
Work on a flat surface
WARNING
Do not disassemble or modify the pedestal.
●
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
●
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
●
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
●
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure.
(above)
●
Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.
Attaching the pedestal to TV
. (Total 4 screws)
Bracket
• Hold the bracket not to
let it fall.
D
(total 4 screws) loosely at
B
Bracket
Accessories
Assembly screws (4 of each)
●
XSS5+16FJK
size (M5 x 16)
Bracket (1)
●
TBL5ZA33201
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when
using the wall hanging bracket or repacking the TV.
1. Remove the assembly screws
2. Lift the TV from the pedestal.
3. Remove the assembly screws
●
XYN4+F15FJK
size (M4 x 15)
Base (1)
●
TBL5ZX04901
from the TV.
from the bracket.
9
Publicidad
