Publicidad
Idiomas disponibles
Idiomas disponibles
6. Explanations Of Warning Signs Used For This Tool.
The operator's instruction
must be read before work
starts
7. Application.
Rotary power tool, with a reversible or non-reversible spindle fitted with a screw driver bit, for
The purpose of tightening or loosening threaded fasteners, usually screws.
8. The weight of this tool is about : 0.36~1.7 Kgs.
Note: If the weight of this tool exceeds 15Kgs, the following attention shall be paid to:
(1) Be sure that you can afford the weight.
(2) Be sure to wear foot protection, to prevent the risk of impact due to the drop of tool.
3. Maintenance Instruction
1. Lubrication.
Proper lubrication is the owner's responsibility Failure to lubricate the air tool properly will dramati-
cally shorten the life of the tool and will void the warranty.
This screwdriver requires lubrication before the initial use and before and after each
additional use.
2. Screwdriver requires lubrication throughout the life of the tool and must be lubricated in two
separate areas : the air motor and the screw mechanism. Follow the outlined procedures.
3. Air Motor Lubrication.
The motor must be lubricated daily. An air motor cannot be oiled too often.
Warning: Risk of crushing
(intended for open-ended
spanners)
ENGLISH
Warning: Risk of crushing
(between the reaction bar
and the working piece)
18
Direction of rotation
Publicidad
