Ashdown Engineering TOURBUS 10 Guia Del Usuario página 3

TOURBUS
1. Input Jack
Plug in your bass guitar here using a standard guitar cable with a 1/4 inch jack.
2. Master Volume Control
Use this control to adjust the overall output of the amplifier. Make sure you turn this
control fully to zero before turning the amplifier on.
3. Bass Control
Use this control to adjust the amount of low frequencies (bass) applied to the signal.
3a. Middle Control
(TourBus 15 ONLY)
This control adjusts the amount of mid-range frequencies applied to the signal.
4. Treble Control
Use this control to adjust the amount of high frequencies (treble) applied to the signal.
5. Headphone Jack
This 1/4 inch jack socket can be used to plug in stereo headphones for silent rehearsal.
Plugging headphones in automatically mutes the speaker. This socket can also be used
as a direct recording output, and in situations where you want to mute the speaker while
recording.
6. MP3 INPUT
Use this 3mm mini jack to plug in an external MP3 player so that you can play along with
songs.
7. On/Off Switch
Use this switch to turn the amplifier on and off. The amplifier is on when the LED is
illuminated.
TOURBUS
USER GUIDE
8. Power Cable Connection
Plug in the included power cable here to connect the amplifier to a standard mains
wall outlet.
SPECIFICATIONS:
TOURBUS EVO-10
OUTPUT
SPEAKER
WEIGHT
BOX DIMENSIONS
INPUT IMPEDANCE
HEADPHONE IMPEDANCE
CD/MP3 INPUT
TOURBUS EVO-15
OUTPUT
SPEAKER
WEIGHT
BOX DIMENSIONS
INPUT IMPEDANCE
HEADPHONE IMPEDANCE
CD/MP3 INPUT
USER GUIDE
10 Watts
Custom 6.5 inch / 4Ω
8.8 lbs / 4 kg
9.3" x 10.8" x 7.5"
(235mm x 275mm x 190mm)
1MΩ
32Ω or greater (600Ω for best results)
Yes
15 Watts
Custom 8 inch / 8Ω
16.15 lbs / 7.35 kg
13.75" x 11" x 14.5"
(348mm x 276mm x 365mm)
1MΩ
32Ω or greater (600Ω for best results)
Yes